CBM2098P

Model Overview

CBM2098P appears in the Flash compatibility controller field. Based on its model family, the vendor is ChipsBank and the common interface is USB / USB drive (inferred from model family). Suffixes, revisions, and package variants can change firmware compatibility; always use the complete chip marking and PCB revision.

Compatibility and Speed in the Dataset

• Related Flash part numbers: 56
• Benchmark records: 0
• Sequential read: average — MB/s, maximum — MB/s
• Sequential write: average — MB/s, maximum — MB/s

Speed is determined by the complete Flash, firmware, PCB, bridge, and test-environment combination; it is not the controller’s official performance limit.

Detailed Benchmark Results

Known Compatible Flash

Matching MP Tools

• No matching archived MP tools are currently available.

Other Tools from the Same Vendor

The tools below share the ChipsBank vendor category with CBM2098P, but may target different controller models, hardware revisions, or Flash configurations. They are not necessarily interchangeable.

Mass-Production and Identification Checklist

1. Verify the full controller marking, suffix, PCB revision, and interface.
2. Read the Flash ID from every channel and CE, then cross-check the compatibility table.
3. Select a tool version containing the matching Flash database and firmware branch.
4. Mass production destroys data; do not write firmware or run production when recovery is required.

Data Sources

Compatibility and benchmark figures come from the FlashInfo snapshot included with this site. Vendor and interface values are model-family inferences and do not replace manufacturer datasheets.