IS916EN

Model Overview

IS916EN appears in the Flash compatibility controller field. Based on its model family, the vendor is Innostor and the common interface is USB / USB drive (inferred from model family). Suffixes, revisions, and package variants can change firmware compatibility; always use the complete chip marking and PCB revision.

Compatibility and Speed in the Dataset

• Related Flash part numbers: 144
• Benchmark records: 0
• Sequential read: average — MB/s, maximum — MB/s
• Sequential write: average — MB/s, maximum — MB/s

Speed is determined by the complete Flash, firmware, PCB, bridge, and test-environment combination; it is not the controller’s official performance limit.

Detailed Benchmark Results

Known Compatible Flash

This page shows the first 120 of 144 compatible part numbers. Search the Flash section for this controller model to view all matches.

Matching MP Tools

• No matching archived MP tools are currently available.

Other Tools from the Same Vendor

The tools below share the Innostor vendor category with IS916EN, but may target different controller models, hardware revisions, or Flash configurations. They are not necessarily interchangeable.

Mass-Production and Identification Checklist

1. Verify the full controller marking, suffix, PCB revision, and interface.
2. Read the Flash ID from every channel and CE, then cross-check the compatibility table.
3. Select a tool version containing the matching Flash database and firmware branch.
4. Mass production destroys data; do not write firmware or run production when recovery is required.

Data Sources

Compatibility and benchmark figures come from the FlashInfo snapshot included with this site. Vendor and interface values are model-family inferences and do not replace manufacturer datasheets.